What are the Basic Issues of VLAN and How do Troubleshoot Issues

What are the Basic Issues of VLAN and How do Troubleshoot Issues?

by


What are the Basic Issues of VLAN in a Network?

A virtual LAN (VLAN) is a group of computers with common networking requirements that are configured as if they were on a single, physical LAN. Computers in different VLANs cannot communicate with each other directly. In order to communicate, they must go through a router or gateway.

Here are the basic issues of VLAN in a network:

VLAN Not Configure Correctly

One of the issues of VLAN in a network is that it might not be properly configured. If the VLAN is not configured correctly, the computers in different VLANs will not be able to communicate with each other.

How to Troubleshoot?

In order to fix this issue, you need to check the configuration of the router or gateway. Here are the steps:

  1. Check the IP address of the router or gateway.
  2. Make sure that the router or gateway is properly configured for the VLAN.
  3. If the router or gateway is not properly configured, you need to reconfigure it.
  4. Once the router or gateway is properly configured, the computers in different VLANs will be able to communicate with each other.

Incorrect VLAN Membership

Another issue of VLAN in a network is incorrect VLAN membership. This issue can occur when a computer is assigned to a VLAN that it does not belong to. As a result, the computer will not be able to communicate with the other computers in the same VLAN.

How to Troubleshoot?

In order to fix this issue, you need to check the VLAN membership of the computer. Here are the steps:

  1. Check the VLAN membership of the computer.
  2. Make sure that the computer is assigned to the correct VLAN.
  3. If the computer is not assigned to the correct VLAN, you need to reassign it.
  4. Once the computer is properly assigned to the VLAN, it will be able to communicate with the other computers in the same VLAN.

Missing Inter-VLAN Routing

Another issue of VLAN in a network is missing inter-VLAN routing. This issue can occur when there is no router or gateway between two VLANs. As a result, the computers in different VLANs will not be able to communicate with each other.

How to Troubleshoot?

In order to fix this issue, you need to add a router or gateway between the two VLANs. Here are the Steps:

  1. Connect the router or gateway to the two VLANs.
  2. Configure the router or gateway for inter-VLAN routing.
  3. Once the router or gateway is properly configured, the computers in different VLANs will be able to communicate with each other.

Unwanted VLAN Broadcast

Another issue of VLAN in a network is unwanted VLAN broadcast. This issue can occur when a computer sends a broadcast message to all the computers in the same VLAN. As a result, the computers in different VLANs will also receive the broadcast message.

How to Troubleshoot?

In order to fix this issue, you need to check the configuration of the computer. Here are the Steps:

  1. Check the configuration of the computer.
  2. Make sure that the computer is not configured to send a broadcast message to all the computers in the same VLAN.
  3. If the computer is configured to send a broadcast message to all the computers in the same VLAN, you need to reconfigure it.
  4. Once the computer is properly configured, it will not send a broadcast message to the computers in different VLANs.

VLAN does Not Pass Through the Trunk Port and Access Port

It might not pass through the trunk port and access port. This issue can occur when the VLAN is not configured correctly on the trunk port and access port. As a result, the computers in different VLANs will not be able to communicate with each other.

How to Troubleshoot?

In order to fix this issue, you need to check the configuration of the trunk port and access port. Here are the Steps:

  1. Check the configuration of the trunk port and access port.
  2. Make sure that the VLAN is properly configured on the trunk port and access port.
  3. If the VLAN is not properly configured, you need to reconfigure it.
  4. Once the VLAN is properly configured, the computers in different VLANs will be able to communicate with each other.

VLAN Tagging Issue

Another issue of VLAN in a network is VLAN tagging. This issue can occur when the VLAN tags are not configured correctly. As a result, the computers in different VLANs will not be able to communicate with each other.

How to Troubleshoot?

In order to fix this issue, you need to check the configuration of the VLAN tags. Here are the Steps:

  1. Check the configuration of the VLAN tags.
  2. Make sure that the VLAN tags are properly configured.
  3. If the VLAN tags are not properly configured, you need to reconfigure them.
  4. Once the VLAN tags are properly configured, the computers in different VLANs will be able to communicate with each other.

What are the Basics Troubleshooting Commands of VLAN?

What are the Basic Issues of VLAN and How do Troubleshoot Issues

There are several troubleshooting commands of VLAN. These commands can help you to troubleshoot the issue of VLAN in a network. The following are the basic troubleshooting commands of VLAN:

#show VLAN Brief: This command will show you the VLAN information.

#show interfaces: This command will show you the interface information.

#debug VLAN: This command will help you to debug the VLAN issue.

#undebug all: This command will help you to turn off the debug mode.

#show running-config: This command will show you the running configuration of the router.

#show startup-config: This command will show you the startup configuration of the router.

#show IP interface: This command will show you the IP information of the interface.

#show IP route: This command will show you the IP routing table.

Leave a Comment